CAD Engineering Design Blog
For ECAD, MCAD and WCCA
Latest Blog Posts
Stop Paying for PCB Design Rework You Could Have Avoided
Imagine completing your PCB layout after days or even weeks of design work, only to discover during prototyping...
PCB Design Review Passed—Can SI/PI Reveal Hidden Issues?
A PCB can pass every design check and still leave one critical question unanswered: will it actually...
Is PCB Design Verification Enough to Prevent Rework?
IPC’s electronics assembly quality benchmarks track rework and scrap as measurable costs of poor...
PCB Analysis Before or After Layout: Which Matters More?
The PCB layout is finished. Routing is complete. DRC is clean. The board looks ready for fabrication.
Then...
5 PCB Design Constraints That Can Conflict in Real Designs
A PCB layout rarely fails because one requirement was ignored. More often, two valid requirements pull...
What Makes PCB Via Design Reliable for High-Speed Boards?
A high-speed PCB can have controlled-impedance traces, a planned stackup, and clean routing yet still...
Custom vs Standard Enclosure Design: Which Is Right for Your Product?
A PCB can work perfectly on the bench and still create problems when it has to fit inside a real product.
The...
PCB Copper Thickness: What Engineers Expect vs What Actually Happens
An engineer specifies 1 oz or 2 oz copper for a PCB and expects the finished board to perform accordingly.
But...
How Does PCB Trace Width Affect Current Capacity?
A wider trace can carry more current—but width is only one part of the equation.
Every PCB trace width...
When PCB Space Runs Out, HDI PCB Design Becomes the Answer
A PCB can have the right components, stackup, and routing plan yet still run out of space. This is common...
ECAD MCAD Co Design: Simple Guide for Better Hardware Design
Have you ever finished a PCB design only to find it doesn’t fit inside the enclosure?
A connector...
Why PCB Design Rule Check Is Essential for Reliable PCBs
Nearly 60–70% of PCB fabrication re-spins happen due to rule violations that were not caught during design...
Latest Case Studies
Thermal Analysis for PCB USB Digital Microscope Module
A Thermal Analysis PCB USB Digital Microscope Module connects to a computer via USB, capturing high-resolution...
Battery Module Enclosure Design for 5kW Home BESS
Designing a 5kW battery module for a home Battery Energy Storage System (BESS) requires careful attention...
Battery Module Design for 5kW Home BESS
Designing a battery module for a 5kW home Battery Energy Storage System (BESS) involves several critical...
Efficient PCB Layout for DMS Systems
Driver Monitoring Systems (DMS) are vital for the safety and efficiency of Advanced Driver Assistance...
EDA Conversion for Advanced Borescope PCB
Advanced borescopes are essential tools across various industries, facilitating thorough internal inspections...
Optimized EDA Conversion for Advanced Videoscope Systems
The Advanced Videoscope Systems PCB Board is a state-of-the-art solution tailored for precision inspection...
EMI EMC Simulation for Automotive Imager Module
EMI EMC simulation in automotive imager modules are a critical concern, especially with the increasing...
Power Integrity Analysis for Videoscope system Board
The Advanced Videoscope Systems PCB Board offers a cutting-edge solution for precision inspection and...
Worst Case Circuit Analysis for Clear View Mirror Board
Ensuring a clear view is vital for safe driving. The Clear View interior mirror transforms the traditional...
Radiated Emission Automobile Imager Module
Radiated emissions in automotive imager modules are a critical concern, especially with the increasing...
Signal Integrity Analysis Autonomous Valet Parking System
Signal integrity is essential for Autonomous Valet Parking (AVP) systems within Advanced Driver Assistance...
Enhancing PCB Design for EMI/EMC Compliance
The Blindspot Monitoring System is an extra set of watchful eyes while driving. Blind Zone Indicators...
Latest e-Books
Material Selection
In automotive design, choosing the right materials is crucial.
Go too far one way, and you overcomplicate...
Automotive PCB Design Challenges
Automotive PCB Design Challenges
Designing PCBs for automotive applications isn’t easy.
High power, heat...
Power Integrity in High Speed Design
Power Integrity(PI)
What’s holding back your ADAS performance?
Power integrity might be the answer.
Power...
Behind The Scenes: MCAD Enclosure Design
Highest Quality MCAD Enclosure Designs
MCAD Enclosure Design for Advanced Driver Assistance Systems (ADAS)...
PCB Signal Integrity
Unmatched Signal Integrity
You’re cruising down the highway,
Your car effortlessly adjusts its...
